Yes, ArtResin epoxy resin is durable, waterproof and can be used to coat fishing lures. Once cured, the resin is inert and therefore does not pose a threat to aquatic life. Although it can be indented with a fingernail in the first few days, it hardens after the first 72 hours. Plus, ArtResin contains light stabilizers to protect against yellowing, giving you a realistic-looking lure that’s built to last!
Best Type of Resin for Fishing Lures
Epoxy resin is a popular choice for coating fishing lures due to its excellent adhesion and durability. It provides a hard, glossy finish that is resistant to water.
Best Practices for Applying Resin to Fishing Lures
Applying resin to fishing lures requires some attention to detail to get that smooth, durable finish you want. Here are a few best practices to keep in mind:
1. Prepare the Surface
Make sure the lure is clean before applying resin. Washing it with soap and water, followed by a rinse with alcohol, will remove oils and contaminants, ensuring better adhesion.
2. Apply a Base Coat
For better adhesion and added protection, apply a clear lacquer base coat to your painted lures before the resin. This extra layer helps ensure a smooth, long-lasting finish.
3. Mixing the Resin
Always follow the resin manufacturer's instructions and mix the resin thoroughly to avoid uncured spots. Many epoxy resins have a 1:1 ratio, but check your specific product’s guidelines.
4. Application Techniques
There are a few ways to apply resin:
- Dipping: Submerge the lure in resin for an even coat, letting the excess drip off.
- Brushing: For more control on intricate designs, use a brush and apply thin layers to avoid drips.
- Pouring: Ensure the lure is propped up and off of your work surface. Pour the resin over top, allowing the excess to drip off. You will need to coat each side at a time and may need to sand off the drips once the resin has cured.
Common Mistakes to Avoid
To get the best results when applying resin, watch out for these common mistakes:
-
Skipping Surface Prep
Proper surface preparation is key for good adhesion. Always clean and dry the surface thoroughly before applying resin to ensure it bonds correctly. -
Applying Resin in Poor Conditions
Humidity and temperature matter! Applying resin in high humidity or low temperatures can affect curing and cause a sticky or cloudy finish. Work in a controlled environment for the best results. -
Under Mixing or Inaccurate Measurements
Incorrect mixing or measurements can lead to curing problems. Always follow the manufacturer’s instructions carefully and measure accurately for the best results.
Conclusion
Choosing the right resin and applying it properly can greatly improve the performance and lifespan of your fishing lures.
ArtResin: The Original Epoxy For Resin Art.
